1971 Power steering hose routing and connections pic requested

[Bushman66]

Hi all,

I have a 1966 C10 that I just converted to power steering using Captain Fab's bracket. I have a 350, short water pump, and the Alan Grove Power steering bracket that mounts the pump on the driver's side, below the alternator.

I used a 71 steering box and a 71 pump. Assuming that the 71 had the same mounting arrangement, I'm assuming that factory hoses will work (probably have to trim the lower lip of the inner fender slightly).

Does anyone have some pictures of a 70-72 power steering setup that shows the routing of the hoses? I assume that the high pressure line connects to the port that is slightly forward and offset to the passenger side?

Thanks!