The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-21-2023, 12:57 PM   #1
mrobvious34
Registered User
 
Join Date: Sep 2014
Location: USA
Posts: 23
Exhaust under rear axle?

Does anyone have any pictures of their exhaust routed under their rear axle? I did a search and read several threads where people have done it but have not seen pictures. I have a 67 swb that is on air bags with a rear mounted gas tank. My current exhaust is tucked inside the frame and runs thru the trailing arm crossmember, over the trailing arms and dumps right before the real axle. I would really like to have it run all the way out the back of the truck, however i do not have enough room to run my pipes (2-1/2") over the axle. I also do not want to cut a hole in the frame and run it on the outside of the frame because I have my air compressor & tank mounted to the frame on the passenger side, and my fuel pump and filters mounted on the outside of the frame on the drivers side. Just curious to know from the people who have done it, if the exhaust would hang to low, or have problems hitting when the rear suspension unloads. Thank you
mrobvious34 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com