Jim Carter trucks bed wood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bc gman · 08-18-2004, 01:08 PM

Has anyone else had a problem with bed wood dimensions from Jim Carter antique trucks.I had purchased my wood from a supplier in Alberta Canada who gets it from the above mentioned, as it turned out, by the time I was ready for the installation of the wood( approx 1 year later )I found out that all of the pieces were 1" too narrow ( on the box it specifies do not open until time of installation ) well 6 months later they finally gave me a credit for the wood but Iam still out the shipping cost (frustrating lesson learned )

08-18-2004, 01:08 PM	#1
bc gman 71 bb longhorn Join Date: May 2004 Location: Surrey B.C Canada Posts: 170	Jim Carter trucks bed wood Has anyone else had a problem with bed wood dimensions from Jim Carter antique trucks.I had purchased my wood from a supplier in Alberta Canada who gets it from the above mentioned, as it turned out, by the time I was ready for the installation of the wood( approx 1 year later )I found out that all of the pieces were 1" too narrow ( on the box it specifies do not open until time of installation ) well 6 months later they finally gave me a credit for the wood but Iam still out the shipping cost (frustrating lesson learned ) __________________ 71 2500 Gmc longhorn with a 402 turbo 400. 09 F150 Supercrew 4x4 05 Mazda 6 sport accept that somedays you are the statue and somedays you are the pigeon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.