fuel from pump to carb question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sactoC10 · 11-24-2004, 08:26 PM

Checked the intake, clean as a whistle...tank clean as can be too. I did NOT plug the vent line, in fact I did not remove the canister. I plugged the two other inlets into the canister. Tried to BLOW through the vent line, was not easy to do...no WHOOSH sound...how do I clean that? Also pulled the cap off just to check, no whoosh sound...think that only happens when it has been operating for a while. Here are some pics, you can see how I tried to insulate the lines (hose against fuel line). NEXT???

11-24-2004, 08:26 PM	#13
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	first run through... Checked the intake, clean as a whistle...tank clean as can be too. I did NOT plug the vent line, in fact I did not remove the canister. I plugged the two other inlets into the canister. Tried to BLOW through the vent line, was not easy to do...no WHOOSH sound...how do I clean that? Also pulled the cap off just to check, no whoosh sound...think that only happens when it has been operating for a while. Here are some pics, you can see how I tried to insulate the lines (hose against fuel line). NEXT??? Attached Images __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.