Selling my 67-72 parts inventory

[ThreeQuarter]

I'd like to sell it all for one price. If no takers, then I'll break it up. Parts are used unless stated otherwise.

BODY:
driver-quality '72 GMC grille--has a couple dents, some surface rust
set of GMC blinkers--'72, with pigtails
windshield gasket--standard black, new, not GM
three GMC fender badges, two tags--"1500 Super Custom" and "2500 Custom"
two side-view mirror gaskets--standard three-hole, new in plastic
two side-view mirror arms--two different lengths
side-view mirror head--round
grommets--brake pedal pushrod (at firewall), and small filler neck, both new
hood, door, glovebox, and tailgate bumper set--new in plastic
vent window frame w/ glass (pass)
vent window frame w/o glass (drvr)
two vent window glasses--one ea. side
one set '72 window regulators--new in plastic, not GM

INTERIOR:
one set chrome door sill plates--new, not GM
A/C glovebox liner
two vent registers from '72 GMC--black
box of hardware--inside & outside door handles, window handles, interior light lens, hdlt. switch, blue visor hooks, more
set of two blue plastic door panels--'72
PRNDL indicator--black plastic, P-R-N-D-L1-L2
seatbelts--drvr. and pass. lap belts from '72 blue, plastic buckle housings gone

STEERING/BRAKES:
set of spindles, rotors, calipers, hoses, pads from '72 C2500--new bearings, rotors, calipers, pads, hoses, dust caps
steering linkage from '72 C2500--complete spindle to spindle, including new tie rod ends, adjuster sleeves, idler arm
lower steering column shaft from '72 C2500
brake master cylinder and booster from '72 C2500

UNDER THE HOOD:
SBC flywheel
A/C compressor from SBC (?)
7-blade fan w/ clutch from SBC (?)
breather from SBC (?)
set of two exhaust manifolds from SBC (?)
? TH400 kickdown switch (?)
box of parts from SBC--water pump, dist., alternator, fuel pump, brackets, more...
starter from '68 327 w/ TH400
starter from SBC 350 w/ NP435 (?)
thermostat housing from '68 327
$200 for all. Will not ship, but may deliver in SE, East, NE, or Central Texas.
In College Station, TX, an hour NW of Houston.

I'm making a website for pics, and will post a link later.

I know some of this stuff might not be worth anything but it's all going together, and I'll let the buyer be the judge. Some of the chassis parts, etc. are new, but have surface rust due to being stored in my non-climate-controlled shed for a couple years (the shed doesn't leak--we have humidity). Nothing (except the grille) was ever stored outdoors.