Need Help - Hub Noise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 Cheyenne K20 · 01-06-2005, 10:00 PM

Hi, I have a 70 3/4 ton w/350/350/NP205. I just got the 205 shifter and linkage put back in tonight and it works perfect. The linkage is tight and the transfer case shifts w/no probs. I ran it on the street to make sure it worked but no go. I'm getting a click-clock noise coming from the drivers side, sounds like the hub. Can't hear the pass side. I put it in Hi and Low and don't feel any pull from the front. Any suggestions before I rip and tear would be great?

Thanks, Scott

01-06-2005, 10:00 PM	#1
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Need Help - Hub Noise Hi, I have a 70 3/4 ton w/350/350/NP205. I just got the 205 shifter and linkage put back in tonight and it works perfect. The linkage is tight and the transfer case shifts w/no probs. I ran it on the street to make sure it worked but no go. I'm getting a click-clock noise coming from the drivers side, sounds like the hub. Can't hear the pass side. I put it in Hi and Low and don't feel any pull from the front. Any suggestions before I rip and tear would be great? Thanks, Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.