panhard bar w/ bags help

[BK]

Well, im almost ready to drive the ole panel again, but i have one dilemma... panhard bar. I mounted my bags about 8" further forward(measuring center of springs to center of bags) than the original coils on the trailing arms. What would be the best process to make sure its in the middle. Would i get an adjustable panhard bar, and get it centered, then just weld the panhard bar mount right then, or what. I have very little clearance in between my trailing arms and my frame, and i would like to do a wishbone setup, only i need more guidance and i am on a very tight budget. I will most likely only use about 6" of lift, although i get about 12 when i wanna play. So any advice, layouts, ideas on panhard bar mounts, panhard bars, where to get um, or wishbones, please let me know(im also staying up to date on the wishbone post). Thanks.