FS: 68 Dash/gauges, SB/Vortec eng. parts, mini starter, more

[rin68]

Cleaned out the garage this weekend. If no one is interested the parts will go on ebay in a couple days. All items are OBO

-Complete dash bezel/gauges out of the 68. All gauges functioned when the dash was removed. $30+ship

-Centerlink from a 71-72 (I think?) 2wd 1/2 ton. I can measure it to verify the year if someone can give me the numbers. $15+ship

-GM ministarter, staggered pattern for 168 tooth flywheel/flexplate. Less than 50 miles on it. $50+ship

The following parts are off of a 1998 Vortec 350

-Full set of connecting rods and pistons. Rods are in good shape, even though the number 5 rod bearing spun. (The crank took all the damage, it's missing over .040" of material on that journal) I believe these are the powdered metal connecting rods. $35+ship

-Driver's side exhaust manifold and EGR pipe, also full set of spark plug heat shields. $25+ship

-Balancer and flexplate. $25+ship each

-Stock hydraulic roller cam from engine. $20+ship

Post/PM any questions. Thanks