Throttle Rod issues & pic request.

[skokie]

Ok I went to install the qjet and I ran into a problem with the throttle rod. PO must have changed it out when he put the holley on there. The problem is that the throttle rod was getting stuck on the kickdown switch plunger plate. I removed the plate for the time being and the problem is solved. If anyone has a 400 turbo with the kickdown switch mounted to the carb can you please post a pic? Also the metal fuel line that I bought on one end the nut is too big for the fuel pump. I had a short piece of metal tube with the correct size nut for the qjet so I hooked that up and then ran a 4 inch fuel hose to the other half of the old setup. Other than that the truck runs great with the qjet on there. I need to ajdust the timing and the carb a little.

Thanks