Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-10-2005, 06:04 PM | #1 |
Senior Member
Join Date: Apr 2000
Location: Oregon
Posts: 2,512
|
T400 with NP205 questions?
Who can verify the lengths of a few setups for me. I would like distance from front of bell housing to center of yoke on rear output shaft of transfercase on a T400 and NP205 setup? Is there a difference in length depending on which model adapter is used? (there is the newer round adapter and figure 8 older version).
Also need the same on a T350 and NP205 setup (version I will switch away from)? and 700R4 with T350 adapter and NP205 transfercase? I hope to pick one and keep the stock mounting location on transfercase cross member which allows me to keep my drivelines too and this will hopefully move motor new BB 2-2.5" forward in engine compartment. I want to lay it all out before I buy a used setup to rebuild or order a Bowtie Overdrive 700R4 and find out lots of stuff moves or doesn't fit perfect. thanks for advise and help.
__________________
Bob |
Bookmarks |
|
|