started shaving... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slammd72 · 02-10-2005, 11:41 PM

i just started installing my silinoids in my truck and i encurred some issues that i think i fixed. was wondering what anyone else did to overcome these issues.

1. i took the arm that "locks" the door off and welded the sliding tab in the "unlock" position.

2. i bent some 18gauge steel to mount the silinoid in the same place the stock interior door handle was.

here are some pics of what i had to do to make it work:

p.s. i have only done the right rear door on my cc. anything different to expect on the fronts. because the fronts are common among all 73-87s? right?

02-10-2005, 11:41 PM	#1
slammd72 Registered User Join Date: Apr 2004 Location: Las Vegas Posts: 225	started shaving... i just started installing my silinoids in my truck and i encurred some issues that i think i fixed. was wondering what anyone else did to overcome these issues. 1. i took the arm that "locks" the door off and welded the sliding tab in the "unlock" position. 2. i bent some 18gauge steel to mount the silinoid in the same place the stock interior door handle was. here are some pics of what i had to do to make it work: p.s. i have only done the right rear door on my cc. anything different to expect on the fronts. because the fronts are common among all 73-87s? right? Attached Images __________________ 88 shortbed crewcab currently getting a sfbd 4 1/4" FREE HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.