Need some electrical help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crawdad · 02-13-2005, 05:16 PM

Can someone tell me what the switch is that is mounted under the dash and looks to be on the accelerator mount. When you push the gas pedal down, the pedal arm comes down onto this switch. Is that the switch for the passing gear on my Turbo 400? If so, how should it be wired. Right now, there are two wires coming out of the switch. One looks like it is going down to the transmission (it's raining, so I didn't climb under there and look) and the other was wired to the Ignition Unfused position on the fuse block.

Thanks for your help.

02-13-2005, 05:16 PM	#1
crawdad Senior Member Join Date: Sep 2004 Location: Georgia Posts: 614	Need some electrical help Can someone tell me what the switch is that is mounted under the dash and looks to be on the accelerator mount. When you push the gas pedal down, the pedal arm comes down onto this switch. Is that the switch for the passing gear on my Turbo 400? If so, how should it be wired. Right now, there are two wires coming out of the switch. One looks like it is going down to the transmission (it's raining, so I didn't climb under there and look) and the other was wired to the Ignition Unfused position on the fuse block. Thanks for your help. __________________ 2012 Silverado LT 1500, 5.3, 6 speed auto '86 SWB C-10 Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.