The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-14-2005, 03:19 AM   #1
muddyole 69
Senior Member
 
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
short wide 4x4 project for sale SE Ohio

Ok I am selling my short wide 4x4 project this truck is in pieces Just wanted that to be known up front what I have is a 69 short leaf 2wd frame with a cut made under the cab and a 71 blazer front frame/suspension professionally squared and welded to it the frame was then plated with 1/2 plate over the butt weld for added strength this has stock springs and 3.73 diffs out from the blazerI have a 8 inch lift springs in front 4 inch springs and blocks rear with dual stabilizers up front and drop line kit as well as all 4 shocks I have the original 3 spd xfer and front shaft from the blazeer still hooked to the frame I also have a sm465 with 205 transfer front and rear drive shafts out of a 78 long bed 4x4 to go with it I have a motor out of the same 78 4x4 prev owner stated odometer to be true at 91K and stated he had put a cam in it 2 or 3 years ago stock replacement the cab is a 69 air cab that is originally from ohio and has had cab corners inner and outer rockers professionally replaced cab is stripped for bodywork and the owner could not pay up so I got cab for money owed the front clip is 70 chevy and has the battery rot issue on pass side drivers side is nice as is support inner and outer grill decent doors decent and bed is rust dent and bondo free as it came from alabama the gate is driver quality and does not latch properly I have from headers back duals if you want em nice front painted bumper rears I have a step and pipe bumper I found that I have a single tube rollbar that fits this truck nerf bars made of 3 inch round tubing I have a second truck from which you can pirate all the interior stuff you want ie wiring etc I do have some later model sbc air stuff brackets etc I will throw in have master cuylinder and pwr booster have a 12 inch flywheel and used very little clutch pack have an extra pair of front fenders hood misc small parts in boxes that will go with it door handles arm rests etc priced it to a board member with less stuff for less money and he was very gracious and passed I have some pics to load tomorrow price 2000 sorry do not want to seperate parts at this time thanks for looking pm we can deal I am trying to scrape up cash for a burb Mike
__________________
hav'n fun be'n me
muddyole 69 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com