Factory stainless steel headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frank_Zeller · 02-19-2005, 06:06 PM

These are factory 1986 stainless steel headers/manifolds used on ¾ ton 350 4-speed trucks. These trucks did not have the catalytic converters and had factory duals. They accept a 2.5-inch head pipe and have the thick flange with tube stand off that will allow the use of the factory brackets used with the cast iron manifolds. I spent a lot of time fixing these up to use on my 69 but they hit the dam frame mount that the motor mount attaches to. These are similar to the GM headers used on the 85 and up Corvettes. Perfect for lowered trucks. See pics for details $75.00

[IMG]

02-19-2005, 06:06 PM	#1
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Factory stainless steel headers PRICE REDUCED These are factory 1986 stainless steel headers/manifolds used on ¾ ton 350 4-speed trucks. These trucks did not have the catalytic converters and had factory duals. They accept a 2.5-inch head pipe and have the thick flange with tube stand off that will allow the use of the factory brackets used with the cast iron manifolds. I spent a lot of time fixing these up to use on my 69 but they hit the dam frame mount that the motor mount attaches to. These are similar to the GM headers used on the 85 and up Corvettes. Perfect for lowered trucks. See pics for details $75.00 [IMG] __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas Last edited by Frank_Zeller; 02-27-2005 at 12:22 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.