The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-28-2005, 08:39 PM   #1
Porkchop
Registered User
 
Porkchop's Avatar
 
Join Date: May 2002
Location: Dowagiac, MI US
Posts: 579
Where to sell and how much???

I have two things that I really need to sell because I need the money back and I need the space. So, do you guys know of any places I would have better luck selling these other than here or the local news paper? Also how much do you think I should ask?

1. LWB truck bed. I don't know what year it is, but it has side marker lights. Comes with upper and lower trim (not attatched, I think one lower trim piece and a tailgaite piece are missing) that is in okay shape. It has a small (2"x2") rusted through spot behind the passenger side wheel well where the tailpipe exited. It could easily be patched with a small piece of sheet metal. There are three rust holes on the inside of the tailgate, but they are small enough that you could probably just patch them with a little welding and some filler metal. Other than that it is rust free and very straight. I bought it for $790 from a guy who ships them from down south. Keep in mind this is michigan and you will never find truck parts in this good of shape.

2. Small Block Chevy 355

-2 bolt main block bored .030" over
-new freeze plugs and cam bearings
-turned cast iron crank
-new rods
-new dished pistons
-new bearings, rings, and gaskets
*the entire rotating assembly was balanced
-new vortec heads
-Crane 1.5 ratio self aligning roller tip rockers
-.420" .443" lift Engle Cam with hydraulic lifters and
pushrods
-ceramic coated flotech headers (made for a 67-72
chevy truck but they may fit other applications)
-Edelbrock performer rpm airgap aluminum intake
manifold
-Edelbrock 750 cfm manual choke carb
-Pro-billet MSD distributer and MSD wires
-New spark plugs
-new timing gears and chain
-new high volume water pump
-new oil pan and oil pump
-chrome accessories (water neck, valve covers,
aircleaner, dipstick etc.)
-some pulleys and brackets (they have all been painted with high temp paint.
-flexplate (for auto tranny) flywheel and clutch
-2 starters

The engine has never been fired. Except for the block, crank, and the last three parts on the list EVERYTHING is brand new. I have at least $3000 into it.

any help is appreciated
thanks
brad
Porkchop is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com