Anyone here have a 73-80 with a 700 or 200 trans installed?

[bigblock73]

Just like the title says. I have a 454/700r4 combo in Yeller (originally a 350/th350 setup), but the clearance from the top of the trans and the cab floor is minimal (like 1/2" or less). Does anyone else here have a OD trans in their 73-80...and even better...a OD trans with a big block? If so, can you please post a pic showing the clearance in question...or at least a rough dimension? I have installed everything correct as far as I know, but this just doesn't seem right...there is basically no room to slide the trans back if I wanted to remove it without removing or jacking up the engine. Swervin posted a pic of his on his 85, and it was very similar...but I just would like more opinions.

Here is my setup...

• 454 mouinted in the frame in the same position as the 350 using the same style mounts and clamshells.
• Same engine towers used, and mounted in the same position on the frame.
• Stock 1973 transmission cross member used, slid back slightly in order to bolt up transmission.
• Energy Suspension transmission mount.

Looking forward to hearing what you folks think, thanks for any help.