Off topic, but can somebody run my motor on desktop dyno?

[flyin99]

I seem to have either lost my disc or loaned it out and I haven't loaded dyno on my new puter yet............this engine is a 421 sbc...

block is 4.155 bore
stroke is 3.875
comp. is 13.75 to 1 (or very very close to it)
AFR 220 cc aluminum heads......2.10-1.65 valves
62 cc chambers
6 inch rods
single plane Super Victor intake
alcohol Braswell 970 cfm carb.
open headers 1 3/4 tubes
cam is a Lunati solid roller specs are :
Dur. at .050 is 262 int. and 271 ex.
Gross dur. is 301 and 309
Lift is .626 and .626
int. opens at 29 deg. btc and closes 53 abc
ex. opens at 65 deg. bbc and closes 25 atc
hope this is every thing....Thanks