WTB: Charcoal Canister and Bracket. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76HighSierra · 03-18-2005, 03:13 AM

I am converting my truck to use a M4MC Rochester Quadra-Jet (it now uses the 4MV) and it has the vent port in front. Instead of capping it off (which I hear can cause a flooding condition), I would like to make use of the charcoal canister. My truck is a federal emmisions "heavy-half" so it does not use one (nor has it ever). Beacuse of this i will be needing the canister, the mounting bracket and the bolts, etc. Basically everything minus the vacuum lines (will be replaced anyways). I would like this to be off of a 1973-1980 model truck, please. Anyone who can help me out, please PM me or respond in this thread. Thanks a bunch.

03-18-2005, 03:13 AM	#1
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	WTB: Charcoal Canister and Bracket. I am converting my truck to use a M4MC Rochester Quadra-Jet (it now uses the 4MV) and it has the vent port in front. Instead of capping it off (which I hear can cause a flooding condition), I would like to make use of the charcoal canister. My truck is a federal emmisions "heavy-half" so it does not use one (nor has it ever). Beacuse of this i will be needing the canister, the mounting bracket and the bolts, etc. Basically everything minus the vacuum lines (will be replaced anyways). I would like this to be off of a 1973-1980 model truck, please. Anyone who can help me out, please PM me or respond in this thread. Thanks a bunch. __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.