68 Camber adjustment problems! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68xxx · 03-18-2005, 06:43 AM

Hi Guys,

I can't set my camber properly on one side as I have found that I am out of length on the bolts and the control arm is just about hitting the frame bracket.

I need to pull the top of the wheel toward the frame to set it correctly.

I have got less than 1/4" of shims on the side that I need to bring in.

My truck is lowered around 4" up front so is there something that I should know.

Any help will be much appreciated.

Thanks, Mark.

03-18-2005, 06:43 AM	#1
68xxx Registered User Join Date: Jun 2004 Location: Gold Coast, East Coast of Australia Posts: 39	68 Camber adjustment problems! Hi Guys, I can't set my camber properly on one side as I have found that I am out of length on the bolts and the control arm is just about hitting the frame bracket. I need to pull the top of the wheel toward the frame to set it correctly. I have got less than 1/4" of shims on the side that I need to bring in. My truck is lowered around 4" up front so is there something that I should know. Any help will be much appreciated. Thanks, Mark.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.