Swaping front end suspension questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79BIG10 · 03-20-2005, 01:06 AM

Okay I've got some front end questions. I've got a chance to use a 85 or 86 front end (not for sure of what year as of yet) off a donor truck and want to save some time. I've got the 79 Big 10 front end (1/2 ton frame with 3/4 suspension) but not sure if the a-arms, spindles, etc. would work? The front end brakes calipers, rotors, are all 5 lug and been redone. I'm going to install all new bushings, etc. but on the a-arms, and spindles I was just curious to see if the newer model of our trucks were the same as the older ones. That's what I'll use off the donor truck if possible to swap over and have already pressed in etc. but need to know for sure.

Anybody ever done this kind of swap?

03-20-2005, 01:06 AM	#1
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Swaping front end suspension questions Okay I've got some front end questions. I've got a chance to use a 85 or 86 front end (not for sure of what year as of yet) off a donor truck and want to save some time. I've got the 79 Big 10 front end (1/2 ton frame with 3/4 suspension) but not sure if the a-arms, spindles, etc. would work? The front end brakes calipers, rotors, are all 5 lug and been redone. I'm going to install all new bushings, etc. but on the a-arms, and spindles I was just curious to see if the newer model of our trucks were the same as the older ones. That's what I'll use off the donor truck if possible to swap over and have already pressed in etc. but need to know for sure. Anybody ever done this kind of swap? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.