Converting to HEI on an inline 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shifty · 03-28-2005, 09:06 PM

I hope I'm not stepping on toes by adding this when there's already an HEI thread, but this is application is pretty specific, so ...

I am so happy with the results of this weekend, I decided to write up a little how-to on swapping to HEI for the inliners out there. I owe a huge thanks to Tex and all of the other guys who helped inspire me to do this and even more the screamin, greasemonkey and others who helped me find the source of my problems during the install.

This FAQ submission shows the process of installing HEI into a 68 Chevy pickup with an L6 250 inline six engine.

03-28-2005, 09:06 PM	#1
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Converting to HEI on an inline 6 I hope I'm not stepping on toes by adding this when there's already an HEI thread, but this is application is pretty specific, so ... I am so happy with the results of this weekend, I decided to write up a little how-to on swapping to HEI for the inliners out there. I owe a huge thanks to Tex and all of the other guys who helped inspire me to do this and even more the screamin, greasemonkey and others who helped me find the source of my problems during the install. This FAQ submission shows the process of installing HEI into a 68 Chevy pickup with an L6 250 inline six engine. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.