A few pics of my project.

[OhioChevy]

I'm in the process of doing a frame off on my 71 cheyenne cst. With the help
of my son-inlaw we did a conversion from a 2wd to a 4wd. Would have been
easier to buy a 4wd frame to begin with but I just wanted to keep the frame
with the original numbers to the truck. We also did a crossover steering on
the truck and on all the steering and track bars we went with 1-1/4" solid
stainless steel. Spent hours polishing these things but the end result was
worth it.




These are the wheels that I will be using. They are the weld scorpio 15x14
and with mickey t. baja claws.



More pics.









A pic of the bed . I had the bed coated with bed liner on top and
bottom. I'm going with viper red on the truck and they did a color match
with the bed liner. I'm very pleased with the job they did for me.




The top plate for the springs was also made out of stainless and I will
be installing polish caps to cover up the nuts. We used a later model dodge
pitman arm with the crossover steering.
LOL the long bolt you see in the bracket for the track bar will be
changed out with a shorter one.