Big Block Bellcrank Bracket

[hotrodmtodd]

That's alot of B's. I have a '71 GMC Camper Special,402, originally 3 on tree, changed to TH400. I am in the process of changing over to 4-speed. My? is, does anybody reproduce the bracket that bolts to the engine that moves the pivot ball forward 1 1/4 inches for truck applications. I also have a '70 C30 with a 350 that has a similar bracket, but small blocks do not have the oil sender next to the car pivot ball hole that big blocks do, so I can't use a small block bracket because of clearance problems with the sender. They both share the same measurements, 5 1/8 center to center, with the pivot ball 1 1/4" forward of the aft hole. It may be the same bracket, you may just have to shim it for big blocks. I am in the process of fabricating a bracket from a spare AC bracket that I will attach a pivot ball to, but if I could get the proper bracket I would feel better about it. If anyone has one or knows who sells them I would be much obliged. Thanks, Hot Rod.