which should I use? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454HO · 05-03-2005, 02:31 PM

I want to do a 3" drop on the front of my '77. I have both DJM 3" drop tubular A arms, and 3" drop BellTech spindles. I'm a little nervous about the DJM arms due to that other thread. If I use the spindles, I will have to convert to the 1" thick rotors because they are the 3120's. That's not a big deal because I have to buy new rotors and calipers anyway. So which should I do... take my chances with the DJM arms, or convert to 1" rotors and use the BellTech spindles?

05-03-2005, 02:31 PM	#1
454HO Registered User Join Date: Apr 2005 Location: Austin, TX Posts: 1,224	which should I use? I want to do a 3" drop on the front of my '77. I have both DJM 3" drop tubular A arms, and 3" drop BellTech spindles. I'm a little nervous about the DJM arms due to that other thread. If I use the spindles, I will have to convert to the 1" thick rotors because they are the 3120's. That's not a big deal because I have to buy new rotors and calipers anyway. So which should I do... take my chances with the DJM arms, or convert to 1" rotors and use the BellTech spindles? __________________ - Greg



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.