exhaust routing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigDaddyBardo · 05-13-2005, 10:24 AM

Just finished up C-channeling rear suspension and scratching my head as to where to route the exhaust without interferring with ground clearance. I'm bagged on 4 corners w/3" drop spindles and of course c-sectioned rear frame and raised the rear axle up 2" from rear control arms. This, in lowered stance form is about 4" from the ground. I would like all exhaust above the lower frame rails. I thought about running it through the frame (cutting and welding gusets in) under the cab and running it along the outside of the frame rails to rear of truck. Any suggestions?

05-13-2005, 10:24 AM	#1
BigDaddyBardo Registered User Join Date: Mar 2005 Posts: 3	exhaust routing Just finished up C-channeling rear suspension and scratching my head as to where to route the exhaust without interferring with ground clearance. I'm bagged on 4 corners w/3" drop spindles and of course c-sectioned rear frame and raised the rear axle up 2" from rear control arms. This, in lowered stance form is about 4" from the ground. I would like all exhaust above the lower frame rails. I thought about running it through the frame (cutting and welding gusets in) under the cab and running it along the outside of the frame rails to rear of truck. Any suggestions? __________________ 70 chev c-10, bagged, shaved, and slammed 99 Screamin Eagle 103ci Road King HD 68 SS Chevelle BB 02 Denial (Denali) IF IT HAS TITS OR WHEELS YOU'RE GOING TO HAVE PROBLEMS!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.