Guys, really need help with some mirror measurements! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redz 1970 K5 · 05-18-2005, 12:55 PM

So the PO graciously filled in the west coast mirror holes, and I picked up a set of the smaller mirrors (thx drnk2mny). I need some measurements so I can get the mirrors in 'close to' stock position. My truck is far from a stock nor will ever be, so I am not looking for digital caliper accuracy; say within +/-1/8" would be great- just a tape measure should do it just fine.

Please, if someone could look at these pictures, and take these two measurements for me, I would REALLY appreciate it. I can drill the holes and get these puppies installed today.

Pic one- very front of mirror to front of door

Pic two- very top of mirror to top of door

05-18-2005, 12:55 PM	#1
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Guys, really need help with some mirror measurements! So the PO graciously filled in the west coast mirror holes, and I picked up a set of the smaller mirrors (thx drnk2mny). I need some measurements so I can get the mirrors in 'close to' stock position. My truck is far from a stock nor will ever be, so I am not looking for digital caliper accuracy; say within +/-1/8" would be great- just a tape measure should do it just fine. Please, if someone could look at these pictures, and take these two measurements for me, I would REALLY appreciate it. I can drill the holes and get these puppies installed today. Pic one- very front of mirror to front of door Pic two- very top of mirror to top of door __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.