Replacement front spring - questions? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BubbaGreen · 04-15-2002, 12:09 PM

I am going to replace the front springs in
my C-10 with a 350 engine. Looking at
GMCPauls website, he has listed a standard
spring and a variable rate one, which ones
are the best to use. This truck will only
be used on the street (as a daily driver)
and will probably never really haul much,
maybe tow a trailer at most. Any input?
Thoughts on what is the best springs to use.
I may also end up replacing the rears as
well (they are coils too) THANKS!

------------------
71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73
See it at www.prismnet.com/~grzanich

04-15-2002, 12:09 PM	#1
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Replacement front spring - questions? I am going to replace the front springs in my C-10 with a 350 engine. Looking at GMCPauls website, he has listed a standard spring and a variable rate one, which ones are the best to use. This truck will only be used on the street (as a daily driver) and will probably never really haul much, maybe tow a trailer at most. Any input? Thoughts on what is the best springs to use. I may also end up replacing the rears as well (they are coils too) THANKS! ------------------ 71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73 See it at www.prismnet.com/~grzanich __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.