Lowering question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

backinblack · 06-03-2005, 05:24 PM

I just went and got some new tires today. I went from running 235/60/15 on an 8 inch rim in front, and 275/60/15 on 10 inch in the rear to 275/60/15s all the way around.

My problem: Truck was nice and level before, but now because of tire change, the front is approx. 1 inch higher than rear. I love how the bigger tires fill out the huge wheel/fender well in front, but I need to bring the front down 1-1 1/2 inches to make me happy. What's the easiest way to do this besides torching....... I don't have the means for drop spindles, and don't need a full 2 inches.......Any advice appreciated.

TIA

06-03-2005, 05:24 PM	#1
backinblack Registered User Join Date: Aug 2002 Location: Utah Posts: 142	Lowering question I just went and got some new tires today. I went from running 235/60/15 on an 8 inch rim in front, and 275/60/15 on 10 inch in the rear to 275/60/15s all the way around. My problem: Truck was nice and level before, but now because of tire change, the front is approx. 1 inch higher than rear. I love how the bigger tires fill out the huge wheel/fender well in front, but I need to bring the front down 1-1 1/2 inches to make me happy. What's the easiest way to do this besides torching....... I don't have the means for drop spindles, and don't need a full 2 inches.......Any advice appreciated. TIA __________________ 69 chevy SWB 70 GTO 65 GTO hardtop 65 GTO ragtop 77 Trans Am Hmmm. Too many pontiacs, not enough chevy trucks yet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.