Getting ready to order headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87 Shortwide · 06-06-2005, 12:04 AM

Well tommorrow or tuesday I think I will order my header kit

It's coming from Chris Alston's Chassis Works and will include: 3/8" thick header flanges to bolt to the heads, (14) J-bends in 1 3/4" pipe, 2 1 3/4" - 3" collectors.

As soon as I get that in I can start making the headers, then I'll take them to a buddy of mine to be all TIG welded up so they look nice and clean. After I get those done, the hot piping done, and the Intercooler piping done, it'll all be sent off to JetHot to get some coating.

I also found some pretty darn good deals on Polished front mount intercoolers, so I'll save about 300 bucks on the Intercooler

06-06-2005, 12:04 AM	#1
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	Getting ready to order headers Well tommorrow or tuesday I think I will order my header kit It's coming from Chris Alston's Chassis Works and will include: 3/8" thick header flanges to bolt to the heads, (14) J-bends in 1 3/4" pipe, 2 1 3/4" - 3" collectors. As soon as I get that in I can start making the headers, then I'll take them to a buddy of mine to be all TIG welded up so they look nice and clean. After I get those done, the hot piping done, and the Intercooler piping done, it'll all be sent off to JetHot to get some coating. I also found some pretty darn good deals on Polished front mount intercoolers, so I'll save about 300 bucks on the Intercooler __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.