TH-350 back to standard - 70 C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue'66 · 08-08-2002, 10:50 PM

Just bought a '70 C-10 which was has the original 350, but was changed from three on the tree to a TH-350. This was done in the late seventies due to the owners knee problem. In the future, I want to put it back to a manual trans. What are the differences in crossmembers from the three speed to the TH-350. The TH-350 seems to be properly in place, so I'm wondering if they switched crossmembers, too. Also, is the driveshaft different between the two.
I want to either put it back to the three on the collumn, or put in a SM-465 trans.

Thanks for any imput.
-John

08-08-2002, 10:50 PM	#1
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	TH-350 back to standard - 70 C-10 Just bought a '70 C-10 which was has the original 350, but was changed from three on the tree to a TH-350. This was done in the late seventies due to the owners knee problem. In the future, I want to put it back to a manual trans. What are the differences in crossmembers from the three speed to the TH-350. The TH-350 seems to be properly in place, so I'm wondering if they switched crossmembers, too. Also, is the driveshaft different between the two. I want to either put it back to the three on the collumn, or put in a SM-465 trans. Thanks for any imput. -John __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.