Engine pulley ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 06-20-2005, 05:26 PM

I'm now getting to the end of the 350 CI buildup and need some help on pulley setups. It seems that whoever had the 70 GMC before me, changed the alternator to the pass. side and used a long water pump. With the information I have received from here, I was able to get the correct alternator brackets for the left side of the motor and will be going back to the short pump. The problem is, I think I'm going to have to change the pulleys I had on the other setup. Will all I have to replace is the short water pump pulley? Does the crank pulley that was lined up with the long water pump the same as the short wp? Also I have power steering. I hope this isn't too confusing.......

Steve

06-20-2005, 05:26 PM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Engine pulley ? I'm now getting to the end of the 350 CI buildup and need some help on pulley setups. It seems that whoever had the 70 GMC before me, changed the alternator to the pass. side and used a long water pump. With the information I have received from here, I was able to get the correct alternator brackets for the left side of the motor and will be going back to the short pump. The problem is, I think I'm going to have to change the pulleys I had on the other setup. Will all I have to replace is the short water pump pulley? Does the crank pulley that was lined up with the long water pump the same as the short wp? Also I have power steering. I hope this isn't too confusing....... Steve __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.