Stock temp guage wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TruckinDaddy · 06-24-2005, 01:38 PM

I have recently gotten my 307 running again. Now I am starting to trouble shoot a long list. My temp guage is not working. I think it is disconnected at the temp sensor. I have traced the wires from the guage to what I think is the the connector that attaches to the sensor. The wires are hanging free on the driver' side of the engine, but I can't locate the sensor.

Quit laughing.

Where does the sensor bolt in? To the block? To the intake? Somewhere else? Should it be accessible with the engine in the truck?

And one last question, can you tell I am new to these trucks?

Thanks.

06-24-2005, 01:38 PM	#1
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	Stock temp guage wiring I have recently gotten my 307 running again. Now I am starting to trouble shoot a long list. My temp guage is not working. I think it is disconnected at the temp sensor. I have traced the wires from the guage to what I think is the the connector that attaches to the sensor. The wires are hanging free on the driver' side of the engine, but I can't locate the sensor. Quit laughing. Where does the sensor bolt in? To the block? To the intake? Somewhere else? Should it be accessible with the engine in the truck? And one last question, can you tell I am new to these trucks? Thanks. __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.