Ride height question.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

knsmodels · 07-06-2005, 02:20 PM

I have a 72 LWB K10 with the stock springs.....on level ground with no load the back of the truck looks low....I think that is the way they are from the factory....anyway...I dont care for this look as it always looks like there is weight in the back.....What is the best way to raise the back up about an inch.....Have my springs re-arched, new springs with a new arch, or lift blocks?? I am leaning towards the new springs but wanted some opinions...the stock springs on the truck are not that old....Thanks....Paul

07-06-2005, 02:20 PM	#1
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	Ride height question.... I have a 72 LWB K10 with the stock springs.....on level ground with no load the back of the truck looks low....I think that is the way they are from the factory....anyway...I dont care for this look as it always looks like there is weight in the back.....What is the best way to raise the back up about an inch.....Have my springs re-arched, new springs with a new arch, or lift blocks?? I am leaning towards the new springs but wanted some opinions...the stock springs on the truck are not that old....Thanks....Paul __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.