About to Yank the 6 and have some questions..? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

motocrosschump · 07-14-2005, 09:39 AM

I am replacing a 250 with 3 on the three with a 350 out of a 95 Chevy. The motor has been completely rebuilt and has a Performer intake a Holley 600 Carb.Here goes goes my questions.

1) i want to keep the three speed on the column, do I need to pull it out at the same time as the motor to make it easier?

2) Will I need motor mounts for the 350?

3) Will my starter and alternator off the L6 work?

4) Do I need to run new wires to accomidate the newer engine?

5) Will the 350 button directly up with the Three Speed

..... any tips or feedback?

07-14-2005, 09:39 AM	#1
motocrosschump Registered User Join Date: May 2005 Location: Texarkana, AR 71854 Posts: 397	About to Yank the 6 and have some questions..? I am replacing a 250 with 3 on the three with a 350 out of a 95 Chevy. The motor has been completely rebuilt and has a Performer intake a Holley 600 Carb.Here goes goes my questions. 1) i want to keep the three speed on the column, do I need to pull it out at the same time as the motor to make it easier? 2) Will I need motor mounts for the 350? 3) Will my starter and alternator off the L6 work? 4) Do I need to run new wires to accomidate the newer engine? 5) Will the 350 button directly up with the Three Speed ..... any tips or feedback? __________________ 2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3 Last edited by motocrosschump; 07-14-2005 at 09:40 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.