Santa came early! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 07-14-2005, 04:00 PM

Here are my new steering parts for the full hydro. I ordered every thing from PSC Motorsports. What I got is an orbital valve, 16" column w/ quick release, new hi-flo pump with serp pully and mounting brk to my 5.0 set up that is on my 5.8L, a PS fluid res, 2.25" bore 8" stroke cylinder and rod ends. This should keep my busy for a few days. This is for my tube chasie rock crawler that is yes Ford based but my 351W is running a full chevy TBI set up including a HEI dist. On this kind of rig you need full hydrolic steering due to the amount of suspention travel it will get. As soon as this is up and running I will be able to pull my 71 Chevy out from under its storage shelf and get it finished as well.

Kevin

07-14-2005, 04:00 PM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Santa came early! Here are my new steering parts for the full hydro. I ordered every thing from PSC Motorsports. What I got is an orbital valve, 16" column w/ quick release, new hi-flo pump with serp pully and mounting brk to my 5.0 set up that is on my 5.8L, a PS fluid res, 2.25" bore 8" stroke cylinder and rod ends. This should keep my busy for a few days. This is for my tube chasie rock crawler that is yes Ford based but my 351W is running a full chevy TBI set up including a HEI dist. On this kind of rig you need full hydrolic steering due to the amount of suspention travel it will get. As soon as this is up and running I will be able to pull my 71 Chevy out from under its storage shelf and get it finished as well. Kevin Attached Images Last edited by Rokcrln; 07-14-2005 at 04:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.