punch holes in dash for A/C? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mvpco · 07-26-2005, 01:21 AM

HI All!

Any Ideas on cutting, punching the 2 round,oval holes and rectangle hole in the dash when adding/installing the A/C vents?

thought I would ask before I tackle it.

The Air is working good, now just need to finish the vents. This is the factory setup I took off a 72 with A/C and adding it to a 72 without a/c.

I made the templates from an orig. dash, I marked them on my dash, now just need to cut, punch them out.

Jeff Smith
Pensacola, FL

07-26-2005, 01:21 AM	#1
mvpco Registered User Join Date: Apr 2005 Location: Pensacola, FL Posts: 400	punch holes in dash for A/C? HI All! Any Ideas on cutting, punching the 2 round,oval holes and rectangle hole in the dash when adding/installing the A/C vents? thought I would ask before I tackle it. The Air is working good, now just need to finish the vents. This is the factory setup I took off a 72 with A/C and adding it to a 72 without a/c. I made the templates from an orig. dash, I marked them on my dash, now just need to cut, punch them out. Jeff Smith Pensacola, FL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.