Frustration! Reproduction inst. bezel etc.

[4X4GMC1972]

I purchased a reproduction instrument panel bezel, lens, and woodgrain applique via mail order.

Upon inspection of the woodgrain applique, it did not match the holes on the new bezel properly. I layed it over my original bezel and it fit a little better. Furthermore, the woodgrain is not the right shade of color and grain. Not even close really. I stuck it on the bezel anyway. It actually turned out a little better than I expected. There is up to a 1/16" mismatch in places. I'm not sure how noticable it is to the casual observer, but it aggrivates me!

I received the lens later on a backorder. When I compared it to the original, I was even more disappointed. First, the font style and size does not match the original. When you lay it over the original, the letters and numbers are as far as 1/8" off from the originals. When I installed it, of course, it was not centered with the holes on the bezel.

These were bought through a supplier that sells GM parts. I didn't take the cheapest route by any means. I am not trying to do a concours restoration but, I would like something that is close to appearing original.

Has anybody else had this particular problem? Any recommendations as to who supplies these pieces that are close to the originals in quality and appaerance?

Sorry for the long winded post. I just hope nobody else throws away as much money as i do on crap!

Todd