Temp Gauge Troubles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RJ Swanson · 08-05-2005, 09:41 AM

When I take the wire off the sending unit and ground it out, the needle moves 3/4 of the way across the gauge.
(I think this would indicate that the gauge is OK?)
I also put in a new temp sensor between the #1 & #3 spark plug. I did not use teflon tape as not to interfere with the ground. Still the needle only jumps when I turn the key on and nothing after that.

Any other Ideas that could cause my temp gauge not to work?

08-05-2005, 09:41 AM	#1
RJ Swanson Registered User Join Date: Aug 2005 Location: Canton SD Posts: 7	Temp Gauge Troubles When I take the wire off the sending unit and ground it out, the needle moves 3/4 of the way across the gauge. (I think this would indicate that the gauge is OK?) I also put in a new temp sensor between the #1 & #3 spark plug. I did not use teflon tape as not to interfere with the ground. Still the needle only jumps when I turn the key on and nothing after that. Any other Ideas that could cause my temp gauge not to work?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.