Looky what the big brown truck brought me today!

[a squarecan]

Hey guys,

Well I finally got the stuff I ordered from Jason minus the Chrome Viar 450 which is on back order but Jason says it will be here tuesday so I am not too worried about it! Here is a pic of what I came home too.


Pretty much everything I need upfront minus line and fittings which I will get this weekend hopefully.

Now to the hard part though! I have never attempted to plumb my own bag system before so I am not really sure where I wanna start! I have checked out Jason's pic of how to plumb it but I am still kinda lost. Any advice for a first time bagger? I still have my cab and bed on but my front suspension is completely torn apart now. Where are you guys mounting your tanks? I have a 64 short bed. I plan to rebuild the entire back half from the cab back. My plans are to run an ECE cross member but move it back about 12 inches and run a similar design link in the back and then run a straight arm on each side outside the frame rails; which I plan to mount my bags on. My thoughts right now is mounting all my stuff in the bed, but I am not so certain about that for 2 reasons. 1 I want it to look clean and 2 I live up in the ghetto and my ish would be gone in a short time, so if I can keep it out of the bed that would be great, but if that is my only real option I will just sleep with my tek close by. By the way I am (well will be) running a 74 flat chevelle tank in back between the frame rails so behind the axel is not an option.

But any help will be greatly appriciated!

Thanks
Keith