1970 K20 4x4 project truck in Indiana.....

[big70chevy]

I hate to do this but it's time the 70 and I part. I am buying a different home and with that I won't most likely have the time and money to finish this thing.
This truck is 1970 K20 that I tore apart 5 years ago and have been slowly making some progress on it. In the past 5 years I have accumulated a mess of new parts and parts from other trucks. This thing won't take too much to finish really. For someone who can paint and do a little body work it won't be much of a job.
Here is a list of all the NEW parts I have for this thing. They total up to right at $9,500.00.
All these parts are New:

Doors
Fenders
Core Support
Floor pans
Rockers
Cab corners
Front bumper (chrome with bolts)
23 gallon fuel relocation kit
Set of 5.13 gears for front 10 bolt and rear 14 bolt
Dual shock setup
Dual steering stabilizer
Stainless front brake lines
Raised steering arm w/riser block
Drop drag link
Ball joints
Wheel bearings, races, and seals
12" custom all spring lift from National Spring
3" body lift
Energy suspension body bushings
44 x 19.5 - 16.5 Super Swamper Boggers
16.5 x 14 Weld Scorpios w/center caps and nuts
Warn premium lockouts
Door seals and gaskets
Rear disc brake conversion brackets
Chrome differential covers for front and rear
Front brake calipers w/pads
Front drag link
Full coverage nylon carpet, carpeted door bottoms, and kick panels
Front outer axle shaft
And misc. chrome parts........

That's all of the new stuff......

I also have a nice set of rust free bed sides other than the ones in the pics below, PS fender, fuel tank, and some other misc. parts. Everything is there to put the truck back together but the inner and outer grille a tailgate, and a rear bumper. The frame has been bead blasted and is sealed. The cab also has been stripped inside and out and is sealed but still needs the new metal weld in. I have a sm465/205 that came out of it and it is in great working order. The motor is a 400 SB and has just been hot tanked and bored .030 over. It comes with a new set of Crane roller rockers, new set of Dart heads, a new 292 Comp Cam w/install kit, and crank.

I am not interested in parting this thing out in any way other than if someone would be interested without the motor. Then I would be willing to adjust the price for the difference.

I am asking $12,500.00 for this entire project package. If anyone has any questions feel free to ask and I will get back with you. If anyone would like more pics feel free to ask.

I am located in Southeastern Indiana about 40 miles West of Cincinati Ohio for anyone who would like to see it you are more than welcome to stop and take a look.

Here are a few pics of the truck when it was somewhat together. This will be the way the truck will sit when done. As you can tell in pic #3 it will be a big one. I am right at 6' tall.

http://img.photobucket.com/albums/v4...chevy/70-1.jpg

http://img.photobucket.com/albums/v4...chevy/70-2.jpg

http://img.photobucket.com/albums/v4...chevy/70-3.jpg