|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
08-12-2005, 02:19 AM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
instrument cluster problems
I am putting my interior back together (from paint) Cluster is in, here are my symptons.
When I pull the headlight switch out one notch.  red high beam light comes on. both (LH & RH) turn signal arrows come on half intensity. fuel gage dropped from 1/4 tank to the empty mark. When I pull the head light switch completly out (headlights on). red high beam light goes out. both turn signal arrows come on full intensity (much brighter). the fuel gage drives even farther below the empty mark. In both instances when I turn my turn signals to either left or right the arrows do flash however they stay on. Everthing other than my cluster seem to operate normally. I have tried reseating my plug to the cluster, looking for an open or short (none found). Checking the wiring at the headlight switch (no problems found) HELP PLEASE.  Gary
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES" 
|
|
|
| Bookmarks |
|
|
Threaded Mode