SBC Heads with stuff...full roller valvetrain - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 08-24-2005, 08:10 PM

Head casting 333882 from a 72 Chevy Nova SS.

They have Harlen Sharp 1.5 Roller rockers, screw in studs, pushrod guide plates and stainless 2.02/1.60 valves with 76CC chambers. Slight porting and polishing, heavy duty stainless valve springs.

Also included is a set of roller lifters, correct shotpeened push rods, cam button and a bronze gear for your distributor. I also have a comp cams 260H cam that can go with.

500.00 obro. These are the best SBC cast iron heads GM you'll find for this price.

they've been run for about 4K miles before going big block. That's not rust on the springs, but assembly compound.

The spider webs are included, although they've been stored inside, there's no spiders.

08-24-2005, 08:10 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	SBC Heads with stuff...full roller valvetrain Head casting 333882 from a 72 Chevy Nova SS. They have Harlen Sharp 1.5 Roller rockers, screw in studs, pushrod guide plates and stainless 2.02/1.60 valves with 76CC chambers. Slight porting and polishing, heavy duty stainless valve springs. Also included is a set of roller lifters, correct shotpeened push rods, cam button and a bronze gear for your distributor. I also have a comp cams 260H cam that can go with. 500.00 obro. These are the best SBC cast iron heads GM you'll find for this price. they've been run for about 4K miles before going big block. That's not rust on the springs, but assembly compound. The spider webs are included, although they've been stored inside, there's no spiders. Last edited by FormerMember; 10-04-2007 at 06:33 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.