might sell my project

[68 chevy truck-TPI]

hope i don't have to sell it but i am posting it to see if anyone is interested if i do decide to sell.
68 project truck For Sale
frame and suspension componets have been sandblasted and painted with Por-15 paint. Cab has been restored. outside of cab has been taken down to bare metal then coated with metal etch and sealed with dupont epoxy primer. Suspension has been completely rebuilt and a 3.5”/ 5” drop kit installed. Has disassembled 67 step bed that has restored fenders and good bed sides that have been sandblasted and primed, includes cross siles but no bed front or tailgate. Also has new power disc brake setup and power steering. Doors have been sandblasted and primed but need new inner bottom panel that i have. Rebuilt door hindges.

LIST OF INSTALLED NEW PARTS
2.5” Drop spindles, 1” front drop springs and 5” rear drop springs
early classic relocated adjustable track arm, poly bushing for truck arms and stainless u-bolts. KYB shocks for drop suspension
Control arm shafts and bushings with stainless steal u-bolts.
ball joints, inner and outer tie rods with slieves, pitman arm and idler arm.
front rotors and calipers with new rubber lines and stainless steal lines.
Master cylinder and booster from power master brakes.
Blazer style gas tank and sender and stainless gas line.
1-1/4” powder coated sway bar with poly bushings and mounts for drop suspension
batter box and washier motor and bottle
under hood wiring harness, under dash wiring harness and tail light harness
custom instrument cluster with stock and after market gauges.
Power steering pump and lines. Altenator, flex fan. Fan shroud, water pump, balancer, starter and radiator.

ENGINE, TANNY, AND REAR END
rebuilt 350 turbo with shift improvment kit and rebuilt stock converter

3.73 open diff with sand blasted and painted housing that has new drum brakes and chrome cover. Have a posi carrier for this.

350 motor with GM componets in bottom end and world S/R torquer heads, comp XE268H cam, comp lifters, z/28 springs, crane roller tip rockers, edlebrock performer RPM intake, holley 650 double pumper carb, holley fuel pump, rebuilt distributer, accel wires, double roller timing chain, Dynomax header and muffliers, and Chrome dress up kit. 25k on bottom end.
$3500 FOR WHATS LISTED ABOVE OR $4000 and i will add a fiberglass front tilt kit made by US body