Cranks Over But Won't Start - New Wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4tiresngas · 09-06-2005, 09:57 PM

Okay, I finally installed the new wiring harness I have had for almost 6 months. Now the thing won't start back up. I figure it has to something with the wiring for the distributor...what do you think?

I hooked the big red wire to BATT and the Pink and Yellow to TACH (even though I do not have a tach). I hooked the purple and yellow to the starter.

At the junction block, I connected the two black and red wires and ran a wire from the positive terminal.

Any ideas?

09-06-2005, 09:57 PM	#1
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Cranks Over But Won't Start - New Wiring Okay, I finally installed the new wiring harness I have had for almost 6 months. Now the thing won't start back up. I figure it has to something with the wiring for the distributor...what do you think? I hooked the big red wire to BATT and the Pink and Yellow to TACH (even though I do not have a tach). I hooked the purple and yellow to the starter. At the junction block, I connected the two black and red wires and ran a wire from the positive terminal. Any ideas? __________________ Dan dan.brue@us.army.mil Last edited by 4tiresngas; 09-06-2005 at 10:15 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.