68 Rear Wheel Bearings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CareTaker · 09-07-2005, 10:18 PM

Have a 68 GMC pick-up that has blown rear seals in the axel. I have some concern with the rear axel bearings being shot as well. According to the book there are three kinds of bearings: drop in (easy to do), press in (still easy for me to do ), and machine pressed in (need to go to the dealer or garage to have them do it).

My question: how can I tell if the bearings are press in or machine press in. Short of wailing on it with an impact hammer and seeing if I can get them out?

Many thanks!!

09-07-2005, 10:18 PM	#1
CareTaker Registered User Join Date: Sep 2003 Location: Idaho - Boise Posts: 10	68 Rear Wheel Bearings Have a 68 GMC pick-up that has blown rear seals in the axel. I have some concern with the rear axel bearings being shot as well. According to the book there are three kinds of bearings: drop in (easy to do), press in (still easy for me to do ), and machine pressed in (need to go to the dealer or garage to have them do it). My question: how can I tell if the bearings are press in or machine press in. Short of wailing on it with an impact hammer and seeing if I can get them out? Many thanks!! __________________ "You have the rest of your life to solve your problems. How long you live depends on how well you do it." -Clint Smith Me - 1972 Chevy Blazer 4x4 with a 6" lift Her - 1968 Pickup daily Driver soon to be a Street Rod



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.