changing valve springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OLDCHEV4X4 · 08-24-2002, 08:49 AM

I am trying to change valve springs with the head on the engine and the engine in the Blazer. The new springs are so stiff that i cant hold down the spring compressor and put on the o ring valve guide seal. I would like to use the umbrella type seal so that i could eliminate this problem. But i heard that you cant use this type seal with stock diameter valve spring cause it will hang-up on the damper. Does anyone know if this is true? Also if you use the umbrella seal, do you eliminate the oil splash shield? Please help. I am planing on racing this weekend.
Randy

08-24-2002, 08:49 AM	#1
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	changing valve springs I am trying to change valve springs with the head on the engine and the engine in the Blazer. The new springs are so stiff that i cant hold down the spring compressor and put on the o ring valve guide seal. I would like to use the umbrella type seal so that i could eliminate this problem. But i heard that you cant use this type seal with stock diameter valve spring cause it will hang-up on the damper. Does anyone know if this is true? Also if you use the umbrella seal, do you eliminate the oil splash shield? Please help. I am planing on racing this weekend. Randy __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.