Parts from 72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fastfun · 10-11-2005, 12:31 AM

I have a set of stock height OEM spindles that I took off of my 72 when I lowered it. The spindles are in good condition and the shafts do not have any gouges or scoring from bad bearings. I cleaned, painted and tapped all the threads. I will take $60.00 for the pair plus the ride. These will work on 67 to 70 to convert to front disc brakes. I also have a set of 5 lug axles from a 1/2 ton 1972 that are in good condition, I will take $80.00 for the pair plus the ride.

Thanks

http://i19.photobucket.com/albums/b2...n/Spindles.jpg

10-11-2005, 12:31 AM	#1
Fastfun Registered User Join Date: Jun 2005 Location: Scottsdale, AZ Posts: 615	Parts from 72 I have a set of stock height OEM spindles that I took off of my 72 when I lowered it. The spindles are in good condition and the shafts do not have any gouges or scoring from bad bearings. I cleaned, painted and tapped all the threads. I will take $60.00 for the pair plus the ride. These will work on 67 to 70 to convert to front disc brakes. I also have a set of 5 lug axles from a 1/2 ton 1972 that are in good condition, I will take $80.00 for the pair plus the ride. Thanks http://i19.photobucket.com/albums/b2...n/Spindles.jpg Last edited by Fastfun; 10-11-2005 at 06:01 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.