Edelbrock Performer Intake Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72str8flush · 10-19-2005, 12:00 PM

I need some help. I was installing a new heater core last night (when I bought mine the old one wasn't hooked up, it was interlooped). When I went to install the 5/8" hose from the bottom of the core to the intake I found that the PO had put a 3/4" fitting there to do the interloop. Where can I get that fitting of proper 5/8" size? Or what are my options?

Sorry, I dont have any pictures but it is the hole on the passenger side of the water neck of the edelbrock intakes. Thanks in advance.

10-19-2005, 12:00 PM	#1
72str8flush Registered User Join Date: Aug 2005 Location: Tennyson, Indiana 47637 Posts: 137	Edelbrock Performer Intake Question I need some help. I was installing a new heater core last night (when I bought mine the old one wasn't hooked up, it was interlooped). When I went to install the 5/8" hose from the bottom of the core to the intake I found that the PO had put a 3/4" fitting there to do the interloop. Where can I get that fitting of proper 5/8" size? Or what are my options? Sorry, I dont have any pictures but it is the hole on the passenger side of the water neck of the edelbrock intakes. Thanks in advance. __________________ 72 Chevy Short Bed Fleet: 350/TH350 - Sold - Now trying to sell the parts that I have left over. _______________________ 2006 VW GTI



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.