Pics of how the factory mounted the ECM? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 10-22-2005, 01:29 AM

Hey guys!

I'm looking into re-wiring my TPI pretty much entirely. I'm wanting to know how the factory mounted the ECM behind the glove box, and wether that mount is something I can retrofit onto my old airbox, or if it is moulded into the airbox.

Basically, I wanna put all my relays, and a small fuse box from a mid 80's buick Century with TBI in behind my glove box, along with all my modules etc.

My current install is, in my opinion, messy and too visible. If I do it the way I want, I should be able to have all my relays, modules etc all hidden behind the glove box up against the air box, with only sensory / actuatory wires going out to the TPI intake.

10-22-2005, 01:29 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Pics of how the factory mounted the ECM? Hey guys! I'm looking into re-wiring my TPI pretty much entirely. I'm wanting to know how the factory mounted the ECM behind the glove box, and wether that mount is something I can retrofit onto my old airbox, or if it is moulded into the airbox. Basically, I wanna put all my relays, and a small fuse box from a mid 80's buick Century with TBI in behind my glove box, along with all my modules etc. My current install is, in my opinion, messy and too visible. If I do it the way I want, I should be able to have all my relays, modules etc all hidden behind the glove box up against the air box, with only sensory / actuatory wires going out to the TPI intake. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 10-22-2005 at 01:29 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.