A little more progress...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed67 · 08-31-2002, 01:35 AM

Finally got the steering column back together and put back in the truck. What a pain in the arse! Took it all apart, sandblasted the"visible" parts and painted them turquoise to match the body/interior color. I'm very happy with the results..... just a little more difficult than I had imagined! I was unable to locate the lower bearing and bearing housing for the tilt column. Has anyone had luck finding those parts? Luckily my bearing was in good shape, but the housing was cracked (but usable).

Also shown is my gauge cluster. It's painted off-white with charcoal trim.

08-31-2002, 01:35 AM	#1
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	A little more progress...... Finally got the steering column back together and put back in the truck. What a pain in the arse! Took it all apart, sandblasted the"visible" parts and painted them turquoise to match the body/interior color. I'm very happy with the results..... just a little more difficult than I had imagined! I was unable to locate the lower bearing and bearing housing for the tilt column. Has anyone had luck finding those parts? Luckily my bearing was in good shape, but the housing was cracked (but usable). Also shown is my gauge cluster. It's painted off-white with charcoal trim. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra Last edited by Slammed67; 08-31-2002 at 01:37 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.